Professional Ultrasonic Cleaner with Heater Basket Digital Timer for Jewelry,Ring,Eyeglasses,Denture,Watchband,Coins,Small Metal Parts,Circuit Board etc (33L, S)  | Novelty Gifts Galore | Novelty Gift




Multiple Cleaning Modes for an Extensive cleaning Range: Fullwave,Semiwave,Degas Cleaning Modes based on 40KHz ultrasonic frequency make the device applicable for rough surface cleaning and intensive rinse. Generally, fullwave cleaing mode is used for making intensive rinse, while semwave is used for rough surface cleaning.
Digital Control Panel with LED Display and Memory Function: Digital control panel can make the device be operated more convenient and accurately, and therefore make the device have a long service life; especially the preset cleaning time and heating temperature can be memorized by the device even after power-off unless it is reset manually.
SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and it makes the device be resistant to weak acid and weak alkali.
Free time setting among 1~99 minutes: Extensive time-setting range makes the device be freely set to work for any certain time within 99 minutes based on the characters of the stuffs to be cleaned.
20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F.

 
 
Product Description
 
 
 
 
 
 DKSONIC dual-bands ultrasonic cleaner is professional for diamond jewelry, glasses, watches, dentures, bolt carrier groups, air craft, auto gun parts, Vinyl record, dental equipment, tattoo, glass pipes, bicycle parts, scuba equipment, carbs, vinyl albums, golf balls, firearms, handguns, pistol, revolvers and reloading dies, clocks, dental instruments, door hardware, lawn mowers, pressure cleaners, motorcycles, older vehicles, hooks and brass, gas air compressors, gear, tools, engine carburetors, cartridge cases, brass bullet casings, clock movements, clippers, golf clubs, steel machine parts, cycle carb jets, hardware, handgun, cartridge cases, rifle, nuts, bolts, oily, gunky tools, brass shells, engine parts, fruits, vegetables, car Injector. 
 
 
 
 
 
 
 
 
 
 
 Dual-bands Ultrasonic Cleaner 
 
 Cleaning Jewelries, Coins, Blades, Necklace, Carburetors, Oil Filters, Gun, Bike Chains, Auto Parts etc. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 DK SONIC Dual-Bands Series 
 
 Dual-Bands Heating Ultrasonic Cleaners 
 
 DK SONIC dual-bands series includes 10 units of different sizes which can be used to clean not only small stuffs, like jewelries, but also big stuffs, like carburetors etc, and is characterized by simple, user-friendly operation. Based on the FULLWAVE (40KHz) and SEMIWAVE (28KHz) cleaning modes, all ultrasonic cleaners do better in clean stuffs with complex-shaped surface or blind holes than single-frequency ultrasonic cleaners. Besides, heating function is beneficial to remove oil and wax. 
 
 
 
 
 
 
 
  FULLWAVE for intensive cleaning of blind holes  
 
  SEMIWAVE for gross rinse of simple surface  
 
  Heating function for removing oil and wax  
 
  Degas mode for removing ultrasonic fatigue  
 
  SUS304 Stainless steel tank and drain valve  
 
  Free time setting of 1~99 minutes  
 
  0~80 degrees Celsius temperature range  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Fullwave(40KHz) for Cleaning Bland Holes 
 
 Under the same ultrasonic intensity, 40KHz ultrasonic wave can create more cavitation quantity, and do much better in penetration, than ultrasonic wave close to 20KHz. So 40KHz ultrasonic wave does well in cleaning stuffs with complex-shaped surface or blind holes. Especially, 40KHz ultrasonic wave causes much lower noise than ultrasonic waves close to 20KHz. 
 
 
 
 
 
 Semiwave(28KHz) for gross rinse of simple surfaces 
 
 SEMIWAVE mode is the semiwave mode of 40KHz ultrasonic wave, however, it can also be identified by an oscilloscope as 28KHz. Its penetration performance is not as good as 40KHz, but it does well in cleaning stuffs with simple-shaped surfaces. Especially, SEMIWAVE ultrasonic wave causes much lower noise than single-frequency 28KHz or 40KHz ultrasonic wave. 
 
 
 
 
 
 Heating Function to Remove Oil and Wax 
 
 SUS304 stainless steel does better in resistance to alkali solution and most organic and inorganic acid than SUS201 or other SUS200 stainless steel series. However, SUS304 stainless steel has no resistance to solution with chloridions, such as hydrochloric acid, and hydrofluoric acid. 
 
 Note: Please don't use flammable, explosive or volatile cleaning solution. 
 
 
 
 
 
 Degas Mode for removing ultrasonic fatigue 
 
 DEGAS mode is an intermittent cleaning mode to remove residual bubbles(no cavitation nucleus) which can increase the loss of ultrasonic transmission and decrease the blast strength of cavitations in the cleaning solution. So it is a cleaning mode for removing ultrasonic fatigue to improve cleaning effect. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Ultrasonic Frequency  
 
  Fullwave(40KHz) & Semiwave(28KHz)  
 
  Fullwave(40KHz) & Semiwave(28KHz)  
 
  Fullwave(40KHz) & Semiwave(28KHz)  
 
  Fullwave(40KHz) & Semiwave(28KHz)  
 
 
 
  Transducer Quantity  
 
  1  
 
  2  
 
  3  
 
  4  
 
 
 
  Ultrasonic Power  
 
  60W  
 
  120W  
 
  180W  
 
  240W  
 
 
 
  Heating Power  
 
  100W  
 
  100W  
 
  300W  
 
  300W  
 
 
 
  Tank Capacity  
 
  2L  
 
  3L  
 
  6L  
 
  10L  
 
 
 
  Tank Size (mm)  
 
  175*136*87mm  
 
  240*138*100mm  
 
  300*152*153mm  
 
  300*240*148mm  
 
 
 
  Overall Size (mm)  
 
  200*161*203mm  
 
  262*165*232mm  
 
  327*172*315mm  
 
  325*266*311mm  
 
 
 
  Time Range  
 
  1~99 minutes  
 
  1~99 minutes  
 
  1~99 minutes  
 
  1~99 minutes  
 
 
 
  Drainage  
 
  None  
 
  None  
 
  ✓  
 
  ✓  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Ultrasonic Frequency